Fitment Guideline
Safe Fitment-Safe Usage :
- Do not Use “Bias Construction Tubes” in Radial Application, this may result in Poor Performance or Tube Failure which can cause serious injuries.
- Tire fitment is a skilled Job and need specific tools, avoid faulty tools and foul practices in fitment, It may put your life in danger.
- Use New Tube and Flap of specified Tyre size or Code for every New Tyre.
- Make sure, inside the tire is free from any Foreign Matter and lubricated by powder coating.
- Make sure the rim used is as per the standard and not damaged or having any sharp and protruded points.
- Check The Tube Valve is as per the standard and in line with the rim design.
- Ensure there is no air leakage from Tube body and Valve or valve core by inflating it to it’s nominal perimeter just round-out. ( Avoid over inflation of tube alone)
- Maintain Correct Air Pressure Recommended by Tyre manufacturer for better fuel efficiency and longer Tyre-Tube Life.
- Ensure Good Quality of Valve Core, frequent air leakage may deter Tyre and Tube Life
- Avoid Tyre movement in Under–inflated, Punctured and Run Flat condition, this may lead to Tube valve/valve-stem separation.